Boot camp commands conduct the user in a step-by-step mode in the procedure of installing a Windows operating system on an Apple computer running Mac OS…
·    Boot camp is a public utility that comes in with Mac operating system versions 10.5 and higher. Since Windows users who accept gave way to the Mac platform, these public utility canful comprise by vast esteem equally them allows for a user to ‘dual boot’ a windows operating system on their macs. Dual boot, because the condition advises, are a position where both the operating systems (OS), i.e. mac as well as windows are present on a single computer. While at that place is a few inborn windows applications that can’t run on the mac OS, these public utility are all important as users change over platforms.

However, boot camp are barely an utility program award along the macintosh computer, and it needs to constitute arrange ahead whenever combined need to bring in use of its dual boot function. While setting it up it not difficult in the least, in that respect are a a few bring up pack commands that one needs to know before trying out this utility. The following guide will help you set up boot camp and install a windows OS on your macintosh computer.

Boot Camp commands
To behave come out the installing one and only would ask an Intel-based Mac Computer with 2GB RAM and minimum 10 GB of hard disk space. The first step in the process is running the boot camp assistant followed by installing Windows and then the installation of Boot Camp drivers. The following Boot Camp instructions would guide the user in the process of installation.

Run Boot Camp helper
The beginning step is to log in to the decision maker account and to quit all the other applications that are running. Boot Camp Assistant is located in /Applications/Utilities. Double clicking the icon starts the setup process. Helpful onscreen instructions help you in the process of setting up the windows OS. The primary thing that needs to be done is creating a partition for the windows installation. By default, the existing hard drive on the computer where the mac OS is installed is chosen as the location for the windows installation. This can be changed but is not recommended. Also, boot camp uses exactly half the hard drive for the windows partition. This can be changed as well, but again, it is recommended not to change this value. While 10GB of hard disk space is required, it is important to note that Windows Vista  uses significantly more space than Windows XP , and 10GB might not be enough for a Vista installation. Ideally, an 80GB hard drive and higher will be best suited for dual booting purposes.

Once the partition is created, you can proceed with the next step of the installation. In this step, the windows operating system is installed in the partition created in the above step.

Installing of Windows
The principal matters to keep on in idea although installing windows on a mac machine running boot camp are using complete install discs and using 32 bit operating systems. Complete install discs refer to the entire OS on a single CD or DVD as compared to a 2 CD installation set. In a 2 CD installation set, typically the OS is on one disc while the service pack is on another. Installing windows via boot camp does not allow these 2 CD discs to be used. The other thing to remember is that only 32 bit windows operating systems can be installed via boot camp. 64 bit versions are not supported. The versions to be installed could be any of the following ones: Windows XP Professional Edition, Windows XP Home Edition, Windows Vista Home Premium, Windows Vista Home Basic, Windows Vista Business or Windows Vista Ultimate Edition.

To begin the installing formula, the Windows installation disc should be inserted followed by selecting the “start installation” tab. The onscreen instructions would then guide the user in the process of installation. Selecting the correct partition ensures that the pre-existing Mac OS X is not overwritten. The “C: Partition3 [FAT32]” instruction is used to select the proper partition for Windows while the “Disk 0 Partition 3 BOOTCAMP” instruction is used for Vista. The NTFS or FAT format is used to for the formatting of partition. The accompanying course, ‘Drive Options (Advanced) > Format > OK > Next’ should be followed in the formatting of the partition.

Installment Boot Camp Drivers
in that step, the Mac particular drivers are installed for Windows. The Mac OSX Leopard installation disc is used for the same. The drivers which support the Mac components such as graphics, audio, networking, Bluetooth, Airport wireless connectivity, Apple remote, Apple keyboards, etc., are installed with the help of Mac OSX disc. The Windows installation disc needs to be ejected and the Mac OSX disc should then be inserted. Following the onscreen instructions enables the user in completing the installation process. After the computer restarts, the instructions in the ‘Found New Hardware Wizard’ should be followed.

At one time installed, bring up camp out brings about a boot camp control panel which in turn enables the user to set the default operating system. The path, ‘Apple > System Preferences > Click Startup Disk’ should be followed in selecting the startup disk with the appropriate operating system. By clicking the restart button, one can start using the selected operating system.

The boot camp commands mentioned above would help in installing a Windows operating system on an Apple computer  although the process, equally assured, are comparatively at ease, miss of the important commands awarded higher up could brand these a frustrating experience for even an experienced user.